ارزیابی MSDS آمونیوم پرسولفات برای فرمولاسیون سفید کننده مو برای استفاده در سالن

اطلاعات

تعداد MSDS

نظرات

Store away from sources of heat or ignition, combustible materials (eg wooden pallets or cardboard), reducing agents, strong acids or alkalis. Do not allow to come into contact with

rust, metal ions or metal salts

10/12

most MSDS had incomplete instructions in this section

Transport in accordance with the Australian Dangerous Goods Code. Not to be loaded with class 1, 2.1, 2.3, 3, 4, 5.2, 6, 7, 8, 9 or substances other than dangerous goods capable of combustion

3/12

Spills and disposal

Keep unnecessary personnel from the area of the spill

0/12

Personnel involved in clean-up should wear PPE to prevent skin, eye and respiratory exposure

1/12

Collect spilled material without generating dust eg/ by careful use of a dust pan and brush

3/12

Collect in plastic containers with tight fitting lids

4/12

Do not return spilled contaminated material to containers with pure material

0/12

Do not mix with combustible materials such as sawdust

1/12

Ensure any contaminated surfaces made from combustible materials such as wood or cardboard  have  the  chemical  completely

removed or neutralised

1/12

Wash contaminated area with excess water

5/12

Dispose of in accordance with Local, State or Federal government regulations

10/12

Fire/explosion hazard

Extinguishing media: water jet, water fog, fine water spray

4/12

Firefighting procedures: wear respiratory and eye protection

4/12

if the fire is major involving the whole salon firefighters will need to wear SCBA and protective clothing

Unusual  fire  or  explosion hazards:  may

4/12

accelerate burning when involved in a fire;

may decompose explosively when involved in

a fire; containers may explode when heated;

may ignite combustibles; if safe to do so

remove  containers     from    path  of            fire,

otherwise cool fire exposed containers from a

safe distance

Hazardous decomposition products:  oxides

11/12

of sulfur, sulfuric acid, ammonia (ammonium

persulfate), Na2O (sodium persulfate),  K2O

(potassium      persulfate),     ozone,            oxygen

(increases fire hazard)

Other information

Mixtures of bleach powders and solutions containing hydrogen peroxide (9 and 12%)

0/12

may produce heat when applied to hair. This

may be further enhanced by the presence of

metallic  impurities such as aluminium in

glitter  sprays  or  other  forms.  Should a

reaction occur remove mixture from the hair

by rinsing at the basin. Do not mix with perm

lotions

Contact point

6/6

Australian MSDS

only

Title

6/6

“

Telephone number

6/6

“